AFIRENAS L EXTRA H07Z1-K(AS) TYPE 2 Cu Sn

Functional features

• Technical designation:
  H07Z1-K (AS) TYPE 2 Cu Sn
• Constructive description:
  EN 50525-3-31 & UNE 211002  (Construction and tests)
  
  Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke
  - CONDUCTOR:
  Flexible, tinned copper conductor, class 5 acc. to IEC 60228, EN 60228.
  Cross-sectional area size range: From 4 to 35 mm².
  - INSULATION:
  Halogen free insulation of thermoplastic polyolefin compound, type TI 7 acc.to EN 50363-7.
  Resistant to UV radiation (according to Annex E of the EN 50618 standard).
  Color: Green/yellow.
• Rated voltage:
  450/750 V
• Normal operation temperature:
  70ºC
• Short-circuit temperature (5 s max):
  160ºC
• Voltage test:
  2,5 kV
• Colour:
  INSULATION: Yellow-green.
• Fire performance:
  REACTION TO FIRE. Standards

  Declared performances: B2ca-s1a, d1, a1 (EN 50575:2014+A1:2016)

  - Flame retardant: EN 60332-1-2; IEC 60332-1  (H≤425 mm)

  - Fire retardant: EN 50399 (Fs ≤ 1,5 m - Flame source: 20,5 kW)

  - Heat generation: EN 50399 (20,5 kW)  (THR ≤ 15 MJ & Peak HRR ≤ 30 kW; FIGRA ≤ 150 W/s)

  - Low production and opacity of emitted smokes:

        s1 (EN 50399): TSP ≤ 50 m² & Peak SPR ≤ 0,25 m²/s

        s1a: “s1” & transmittance > 80 % (EN 61034-2; IEC 61034- 2)

  - Flaming droplets and/or particles: EN 50399 (llama: 20,5 kW):

        d1: If no flaming droplets/particles persisting longer than 10 s occurs within 1200 seconds

  - Low acidity and conductivity of the emitted gases: EN 60754-2; IEC 60754-2:

        a1: acidity(pH≥4,3) & conductivity < 2,5 microSiemens/mm

  - System AVCP: 1+

  - Notified body: 0099 AENOR S.A.U.

  - DoP: MB2H07Z1KTYPE2

  For covered range (+ information), please check out "CPR/DoP" section in our website.
  ^{*The packaging labels of these cables include the CE marking according to the CPR Regulation ((EU) Nº 305/2011) articles 8 and 9}
  
  

  Other performances:
  - Fire retardant: EN 60332-3-24 / IEC 60332-3-24 (cat.C)
  - Halogen free. Low emission of toxic gases: EN 60754-1 / IEC 60754-1
• Type of installation:
  Fixed
• User´s guide:
  It is specially indicated for its use in photovoltaic installations, public concurrence places (airports, museums, malls, schools, hospitals, cinemas,...) and, in general, whenever an important fire risk exists or where it´s required a low level of smoke and corrosive gazes emmisions in case of fire or burning. 
  
  Its special fire performance protects public health, fireman works and avoid any possible damage to electronic equipments. 
  
  TYPE 2 cable is for use where special fire performance is necessary, or where local conditions or regulations require increased leves of public safety. It is especially suitable where cables are installed in bunches.
  
  Installation in  surface-mounted or embedded conduits, or similar closed systems (tube, conduit, cable ducting or similar closed systems). It is suitable for fixed installations with complex paths where its flexibility allows an easier installation. Its tinned copper conductor protects against corrosion in connections.
  
  It is recommended for fixed and protected installation in lighting and control gear for voltages up to and including 1.000 V A.C or up to 750  D.C to earth. 
  
  Resistant to UV radiation (according to Annex E of the EN 50618 standard).
• Conductor:
  Flexible
• Halogen free:
  Yes
• Armoured cable:
  No